Apply Now

FacebookGoogle+YouTube
Glidden Hall Room 406
 
COMPUTER
 

Check and see that the PC is turned on. (blue light on) The computer may be in stand by mode.  To take it out of stand by - move the mouse around or hit the space bar or reset the computer.  

     
SOUND
There are speakers attached to the computer.  If you do not have sound - make sure the speakers' power button is on and volume is up.  
There is also a volume button on the creston unit.  

VIDEO PROJECTOR

To get the video projector to work with the computer, first touch anywhere on the crestron box screen.

touch the box screen again to power up system.

To blank or mute the projector screen press the black "pic mute" (picture mute button), located on the NEC remote.  It is on the bottom half -- labeled PIC-MUTE.  touch it again to get  the picture back on the screen
VOLUME CONTROL
To adjust volume, press the black "vol+" or "vol-" buttons on right hand side of the crestron unit. 

VCR

Press power on the VCR player or put tape in VCR

Press the VCR  button on the Crestron

If there is no sound, make sure the mute is not on.

 

 

WHEN YOU ARE FINISHED --

To turn the projector off, press the black " system off" button, (or touch "exit" on the creston screen),  then  touch, "Yes to shut down system".